Send Message
news
Home > news > Company news about No-contact Thermal Imaging Temperature Detection Terminal
Events
CONTACT US
86-21-5423-5256
Contact Now

No-contact Thermal Imaging Temperature Detection Terminal

2021-07-21

Latest company news about No-contact Thermal Imaging Temperature Detection Terminal

Face & Palm Verification Terminal combines Temperature Detection Module

 

The terminal with temperature and mask detection will be a perfect choice to help to reduce the spread of germs and help to prevent infections straightly at each access point of any premises and public areas such as hospitals, factories, schools, commercial buildings, stations during the recent global public health issue with its fast and accurate body temperature measurement and masked individual identification functions during facial and palm verification.

The temperature measuring products use a thermal-based infrared array of sensors. Hence, the installation and operating environment must be within the recommended range and away from any heat source. Otherwise, it will affect the infrared temperature measurement accuracy, resulting in temperature and operational abnormalities. Please read the precautions before using the products. The installation requirements and indicators related to the temperature measurement are given below:

Items Standard value Remark
Environment Indoor, no wind 16 to 32℃(60.8 to 89.6℉) At low temperature (2 to 16℃) and high temperature (33 to 40℃), the temperature measurement accuracy is low, and compensation is required
Distance (between face and device) 30 to 50cm(11.8 to 19.7in) The recommended distance is 40cm (15.7in)
Measurement Accuracy ±0.3℃(±0.54℉) This value is the result of testing under a standard working environment

Notes:

1) The temperature measurement result of the device is only for reference and cannot be used on a medical basis.

2) Due to the infrared characteristics of the devices, in low-temperature environments, the temperature of the human body will be low, and the temperature measured by the device will be significantly lower than the normal body temperature. Therefore, it is recommended to perform low-temperature compensation at low temperatures. Conversely, in high-temperature environments, the body surface temperature will also be higher, and the difference between the ambient temperature and the human body temperature becomes smaller. So, it is recommended to compensate for high temperatures as well.

latest company news about No-contact Thermal Imaging Temperature Detection Terminal  0latest company news about No-contact Thermal Imaging Temperature Detection Terminal  1

 

 

Send your inquiry directly to us

Privacy Policy China Good Quality Fingerprint Time Attendance System Supplier. Copyright © 2015-2024 biometricaccesscontroldevices.com . All Rights Reserved.